Produktai skirti elektronai ir įranga (42)

The electronic pressure switch DS 350 is interesting for all users in plant and machine engineering, due to the integrated IO-Link interface to exchange process data, diagnostic reports and status messages with a superordinate control level, as standard. In addition, further information can be retrieved that allow conclusions to the application process. Especially in mechanical engineering, great demand for flexible operating conditions have to be satisfied. Features — Nominal pressure from 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.5% / 0.35 % (opt. 0.25 %) FSO — IO-Link according to specification V 1.1 — smart sensor profile — data transfer 38.4 kBaud — indication of measured values on a 4-digit LED display — rotatable and configurable display module — parameter settings via IO-Link or menu (VDMA-conform) — additional information via IO-Link accessible Optional features — different mechanical connections

A filling station with electronic scale for the filling of viscous to pasty liquids e.g. paints. varnishes or dispersions, adhesives, bitumen. For filling open containers just above the fill level, e.g. cans, buckets, canisters. Above level filling coarse/fine. Product feed from higher lying storage tanks via natural slope or with the help of pumps. Direct connection via product hoses to the valve. The System offers you: ■ calibratable above level filling just above the fill level with a ride-ci n valve ■ thread-cutting, non-dripping filling valve ■ fast cleaning of the valve (the product-contacted area consists of 3 parts) ■ a rapid changeover to other container sizes and changing products ■ the idéal solution for small and medium filling orders ■ filling, sealing and palletizing by one person ■ small space requirement ■ immediately ready for use, only energy [electricity and/or compressed air only) and product supply must be connected and filling can be started

A filling station with electronic scale for the filling of viscous to pasty liquids e.g. paints. varnishes or dispersions, adhesives, bitumen. For the filling of open containers (min. Ø 150mm opening) just above fill level, e.g. canisters, open lidded drums or IBCs (Intermediate Bulk Container), directly on the pallet. above level filling coarse/fine. Product feed from higher lying storage tanks via natural slope or with the help of pumps. Direct connection via product hoses to the valve. The System offers you: ■ calibratable above tevel filling just above the fill level with a ride-on valve of several containers on one pallet ■ fast and easy valve cleaning (the produkt contact area is made of 3 parts) ■ a rapid changeover to other container sizes and changing products ■ simple operation by one person ■ handling of empty containers (lifting heavy loads (filled containers)) not applicable ■ automatic height adjustment and automatic change of position

The EFS 42 enables complex control tasks and MES/ERP connections as well as remote maintenance. Its modular design allows it to be expanded into a fully automatic filling line with container conveying, capping and labelling. Suitable for viscous to pasty liquids such as paints, it features an electronic scale and fills open containers just above the filling level. The product is fed from storage tanks by gravity or pumps. ■ a calibratable over-level filling unit with travelling valve just above the filling level ■ Thread-cutting, non-drip filling valve ■ quick cleaning of the valve ■ Quick changeover to other container dimensions and changing products ■ The ideal solution for small and medium-sized filling orders ■ Filling, capping and palletising by one person ■ Can be used immediately: just connect energy (electricity and/or compressed air) and product supply and filling can begin

A filling station with electronic scale for the filling of viscous to pasty liquids e.g. paints. varnishes or dispersions, adhesives, bitumen. For the filling of open containers, such canisters, open lidded drums or IBCs (Intermediate Bulk Container), directly on the pallet. Above level filling coarse/fine. Product feed from higher lying storage tanks via natural slope or with the help of pumps. Direct connection via product hoses to the valve. The System offers you: ■ calibrated above level filling of several containers on one pallet ■ thread-cutting, non-dripping filling valve ■ fast and easy valve cleaning (the produkt contact area is made of 3 parts) ■ a rapid changeover to other container sizes and changing products ■ simple operation by one person ■ Handling of empty containers (lifting heavy loads (filled containers)) not applicable

The electronic pressure switch DS 400 is the successful combination of — intelligent pressure switch — digital display and has been specially designed for numerous applications in various industrial sectors. As standard the DS 400 offers a PNP contact and a display module, which is mounted rotable in the ball housing. Additional optional versions like e.g. an intrinsically safe version, a second contact and an analogue output complete the profile. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.35 % (opt. 0.25 %) FSO — indication of measured values on a 4-digit LED display — rotatable and configurable display module Optional Features: — IS-Version Ex ia = intrinsically safe for gases — pressure sensor welded — customer specific versions

The EFS 22 offers flexible expansion options, supports complex control tasks and MES/ERP connections, and enables remote maintenance. Thanks to its modular design, it can be expanded into a fully automatic filling line with container conveying, capping and labelling. Suitable for foaming, gassing or statically charging liquids, such as cleaning agents, it offers electronic scales, automatic container transport and drip-free under-level filling. Product is fed directly from storage tanks via gravity or pumps. ■ Almost foam-free, calibratable under-level filling ■ quick cleaning of the valve ■ Quick changeover to other container dimensions and changing products ■ the ideal solution for small and medium-sized filling orders ■ simple operation ■ low space requirement ■ can be used immediately just connect energy (electricity and/or compressed air only) and product supply and filling can begin

Filling station with electronic balance for precise filling of foaming liquids, for gassing products or products that load themselves statically, e.g.: cleaning and care products, solvents, chemical liquids, mineral oils, glazes. For the filling of open containers, e.g. canisters. Below level filling, coarse/precision filling valve, does not drip. Product supply via pump or gravity. The filling station has the following advantages: ■ a nearly foam free filling that can be calibrated ■ quick cleaning of the valve (the valve area in contact with the product consists of 3 parts) ■ quick conversion to other packing sizes ■ perfect for small and medium-sized filling ■ easy operation ■ the filling station needs only little space

Filling station with electronic balance for precise filling of non-foaming liquids, e. g. chemical liquids or mineral oils. For the filling of open containers, e.g. canisters. Below bunghole filling, coarse/precision filling valve, cut threads, does not drip. Product supply via pump or gravity. Direct connection via product hoses to the valve. The filling station has the following advantages: ■ a nearly foam free filling that can be calibrated ■ quick cleaning of the valve (the valve area in contact with the product consists of 3 parts) ■ quick conversion to other packing sizes ■ perfect for small and medium-sized filling ■ easy operation ■ the filling station needs only little space

aluPLUS est un coffret moderne en aluminium moulé sous pression pour l'électronique industrielle et les applications électriques. Nous proposons plusieurs tailles aux standards industriels permettant l'installation de borniers, de circuits imprimés ou de plaques de montage. Il peut être utilisé dans de nombreuses situations. Il peut tout aussi bien être fixé à un mur en extérieur qu'être employé pour l'électronique industrielle ou en génie mécanique. Le couvercle est doté d'un renfoncement permettant le montage de claviers à membrane ou de faces avant. Les caches design couvrent les vis fixant le coffret au mur ou au plafond et lui confère son aspect soigné. La fixation s'effectue avec le coffret fermé. Les inserts M5 situés sur la partie inférieure et sur le couvercle autorisent des possibilités de fixation optimales pour les montages les plus divers. Nous fournissons également tous les accessoires ainsi que les presse-étoupes correspondants. EN AC-44300 DIN EN 1706:Aluminium

A semi-automatic filling machine with electronic scale for the filling of viscous to pasty liquids e.g. paints. varnishes or inks. For filling open containers, e.g. cans, buckets, canisters. Above level filling coarse/fine. Product feed from intermediate container positioned above the scale with bottom discharge valve using natural drop. The System offers you: ■ calibratable above level filling ■ Thread-cutting, non-dripping filling valve ■ fast cleaning of the container (container and valve are cleaned in approx. 5 min using 1 l of solvent) ■ a rapid changeover to other container sizes and changing products ■ the idéal solution for small and medium filling orders ■ simple operation by one person ■ filling capacity up to 10 containers per minute ■ small space requirement ■ immediately ready for use, only energy [electricity and/or compressed air only) and product supply must be connected and filling can be started

Die HeatUp Industrial ist eine hochwertige Vorwärmlösung, die für einen spannungsfreien Erwärmungsprozess von Mineralwerkstoffen und Thermoplasten entwickelt wurde. Die HeatUp Industrial Vorheizstation ist eine hochwertige und intelligente Vorwärmlösung, die mit einer optimierten Heiztechnologie für einen spannungsfreien Erwärmungsprozess von Mineralwerkstoffen und Thermoplasten (wie ABS, Acrylglas, Kydex etc.) entwickelt wurde. Die Technologie besteht aus einer direkten Kontaktheizung mittels elektrischen Aluminiumheizplatten, die eine schonende und homogene Wärmeverteilung über die gesamte Oberfläche und Stärke Ihres Materials garantieren. Die Vorwärmlösung ist abgestimmt für Produktionszyklen mit einer Vakuumpresse, um das Aufheiz-/Presszeitverhältnis effizient zu nutzen und elektrische Energie zu sparen.